Skip to main content

XSplit Integration Settings

Notice

This document is a machine-translated draft and is currently undergoing review. Some content may be inaccurate or differ from the original Korean version. For the most precise information, please refer to the Korean documentation.

This document describes how to configure XSplit to integrate with the Kollus Live service.

Technical Support

If you encounter issues during external encoder integration or need assistance with video quality settings, please contact our Account Manager(biz@catenoid.net) or Technical Support(tech_support@catenoid.net).

Basic Live Streaming Settings​

Step 1: Check Live Streaming Information​

In the Kollus Live console, check the streaming address and stream key required for live streaming.

  • Streaming address: Kollus Live console > [Channel] > [Channel list] > Select channel > [application link]
  • Stream key: Kollus Live console > [Channel] > [Channel list] > [Edit] on the right side of the target channel > [Creator code] tab at the bottom > [Creator stream key]

Step 2: Configure XSplit Settings​

Enter the information above into the XSplit program settings window.

  • Settings path: [Broadcast] > [Set up a new output] > [Custom Stream]
  • Enter streaming information
    XSplit SettingsKollus Live Console Information
    Server URLApplication link
    Stream keyCreator stream key

Screen Pixelation Prevention Settings​

Screen pixelation may occur when streaming scenes that include presentation materials such as handwriting or PowerPoint slides, or when streaming content with rapid lighting changes or fast motion. To maintain stable video quality, change the settings in XSplit as described below.

Keyframe Interval Settings​

A long keyframe interval can slow down video quality recovery during scene transitions. Therefore, we recommend configuring the setting as follows.

  • Settings path: [Custom RTMP Properties] > [Video Encoding Setup] > [Max Keyframe Interval]
  • Value: 1.0

Standard FPS Value Settings​

If the frame rate is too high, screen pixelation may occur due to insufficient bandwidth. 30 FPS is appropriate for typical lectures or broadcasts.

  • Settings path: [Custom RTMP Properties] > [Video Encoding Setup] > [Video FPS]
  • Value: 30

Service Bitrate Settings​

To prevent video quality degradation in the final service, the original streaming bitrate must be kept higher than the Kollus encoding settings. We recommend setting the XSplit streaming configuration to a bitrate higher than the maximum bitrate of the Kollus encoding profile.

Step 1: Check Bitrate​

In the Kollus Live console > [Settings] > [Encoding profile], check the maximum bitrate value of the profile in use.

Step 2: Configure XSplit Bitrate Settings​

  • Settings path: [Custom RTMP Properties] > [Video Encoding] > [Bitrate]
  • Value: Enter a value higher than the maximum bitrate of the Kollus encoding profile confirmed in Step 1.